xymp
/
TermApp
3
0
Fork 0
Code Issues Pull Requests 4 Packages Projects Releases Wiki Activity

增加单独接入启动摄像机流程

Browse Source
serial
huyizhong 1 year ago
parent a81cc00253
commit 65473d7a6e
4 changed files with 83 additions and 55 deletions
Show Stats Download Patch File Download Diff File

73
TestComm/app/src/main/cpp/SensorsProtocol.cpp
Unescape Escape View File

@ -739,7 +739,6 @@ void Gm_InitSerialComm_Test()
{
int i, j;
srdt.sampling = 0;
srdt.PtzCmdType = Cmd_Cancel; // 云台指令类型
for(i=0; i<MAX_SERIAL_PORT_NUM; i++)
{
@ -977,7 +976,6 @@ void Gm_InitSerialComm()
Gm_InitSerialComm_Test();
// srdt 配置
//srdt.sampling = 0;
//srdt.PtzCmdType = Cmd_Cancel; // 云台指令类型
//srdt.SendStopPtzCmdTimeCnt=-1; // 发送云台停止指令计数
//srdt.uRunMode = 0;
@ -1011,7 +1009,7 @@ void Gm_InitSerialComm()
sprintf(szbuf, "传感器%d接的是PELCO_P摄像机!", i + 1);
break;
case SLANT_PROTOCOL:
sprintf(szbuf, "传感器%d接的是直川倾角!", i+1);
sprintf(szbuf, "传感器%d接的是倾角!", i + 1);
break;
case WIND_PROTOCOL:
sprintf(szbuf, "传感器%d接的是风速风向传感器", i + 1);
@ -1029,16 +1027,18 @@ void Gm_InitSerialComm()
sprintf(szbuf, "传感器%d没有接!", i + 1);
break;
}
LOGI("%s", szbuf);
//LOGI("%s", szbuf);
sprintf(szbuf, "地址%d!；", devparam[i].devaddr);
LOGI("%s", szbuf);
sprintf(szbuf, "%s 地址%d!；", szbuf, devparam[i].devaddr);
//LOGI("%s", szbuf);
if (0 == devparam[i].IsNoInsta)
sprintf(szbuf, "没有启用!；");
else
sprintf(szbuf, "已启用!；");
{
sprintf(szbuf, "%s 已启用!；", szbuf);
LOGI("%s", szbuf);
}
}
#endif
#if 0
//u_char UseSerialidx; // 使用的串口序号
@ -1104,18 +1104,22 @@ void FindDevUseSerialCommNo()
void GM_StartSerialComm()
{
int i, j;
int i, j, commid;
char szbuf[64];
long polltime=0;
// 测试使用初始化配置
Gm_InitSerialComm();
//DebugStringPrintf(szbuf, strlen(szbuf), 1);
memset((void*)srdt.curdevidx, 0, sizeof(srdt.curdevidx));
// 此处不能对轮询设备标识清零，否则如果先起摄像机，就会导致poll乱掉
//memset((void*)srdt.curdevidx, 0, sizeof(srdt.curdevidx));
//Gm_OpenSerialPower(); /* 不在这使用*/
srdt.sampling[0] = 1;
FindDevUseSerialCommNo();
//Gm_InitSensorsIsUse();
// 初始化串口使用状态
// 初始化串口使用状态(需要考虑不同时间启用了摄像机使用)
if(0 == srdt.sampling[1])
{
for (i = 0; i < MAX_SERIAL_PORT_NUM; i++)
{
serialport[i].m_iRevStatus = 0;
@ -1124,27 +1128,55 @@ void GM_StartSerialComm()
serialport[i].fd = -1;
ClearCmdAllFlag(i);
}
}
else
{
for (i = 0; i < MAX_SERIAL_PORT_NUM; i++)
{
for(j=0; j<MAX_SERIAL_DEV_NUM; j++)
{
if(((PELCO_D_PROTOCOL == devparam[i].ProtocolIdx) ||(PELCO_P_PROTOCOL == devparam[i].ProtocolIdx)\
||(SERIALCAMERA_PROTOCOL == devparam[i].ProtocolIdx)) &&(1 == devparam[i].IsNoInsta))
break;
}
if(j < MAX_SERIAL_DEV_NUM)
continue;
serialport[i].m_iRevStatus = 0;
serialport[i].m_iRecvLen = 0;
serialport[i].m_iNeedRevLength = 0;
serialport[i].fd = -1;
ClearCmdAllFlag(i);
}
}
for(i=0; i<MAX_SERIAL_DEV_NUM; i++)
{
srdt.ms_dev[i].FirstCmdTimeCnt = get_msec();
if(0 == devparam[i].IsNoInsta)
{
srdt.ms_dev[i].IsNeedSerial = 0;
continue;
}
memset(szbuf, 0, sizeof(szbuf));
switch(devparam[i].ProtocolIdx)
{
case WEATHER_PROTOCOL: // 气象
sprintf(szbuf, "气象");
srdt.ms_dev[i].IsNeedSerial = 1;
srdt.ms_dev[i].FirstCmdTimeCnt = get_msec();
break;
case RALLY_PROTOCOL: /* 拉力*/
sprintf(szbuf, "拉力");
srdt.ms_dev[i].IsNeedSerial = 1;
srdt.ms_dev[i].FirstCmdTimeCnt = get_msec();
break;
case WIND_PROTOCOL: /* 风速风向*/
sprintf(szbuf, "风速风向");
srdt.ms_dev[i].IsNeedSerial = 1;
srdt.ms_dev[i].FirstCmdTimeCnt = get_msec();
break;
case SLANT_PROTOCOL: /* 倾角*/
sprintf(szbuf, "倾角");
srdt.ms_dev[i].IsNeedSerial = 1;
srdt.ms_dev[i].FirstCmdTimeCnt = get_msec();
break;
case PELCO_D_PROTOCOL: /* 摄像机协议*/
case PELCO_P_PROTOCOL: /* 摄像机协议*/
@ -1156,12 +1188,6 @@ void GM_StartSerialComm()
sprintf(szbuf, "无效传感器");
break;
}
LOGI("装置%d, IsNoInsta=%d, 类型：%s", i+1, devparam[i].IsNoInsta, szbuf);
if(0 == devparam[i].IsNoInsta)
{
srdt.ms_dev[i].IsNeedSerial = 0;
continue;
}
// 测试查询传感器电源状态
#if 0
LOGE("12V state=%d", getInt(CMD_SET_12V_EN_STATE));
@ -1188,6 +1214,7 @@ void GM_StartSerialComm()
// 打开串口通讯
if(1 == srdt.ms_dev[i].IsNeedSerial)
{
LOGI("装置%d, IsNoInsta=%d, 类型：%s", i+1, devparam[i].IsNoInsta, szbuf);
Gm_OpenSensorsPower(i);
Gm_OpenSerialPort(i);
}
@ -1425,7 +1452,7 @@ void GM_IsCloseSensors(void)
if(srdt.ms_dev[i].FirstCmdTimeCnt > 6*1000/TIMER_CNT)
{
srdt.ms_dev[i].IsNeedSerial = 0;
srdt.sampling &= 0xFB;
//srdt.sampling &= 0xFB;
memset(buf, 0, sizeof(buf));
LOGI("通道%d摄像机使用完毕!可以关闭摄像机电源!", devparam[i].CameraChannel);
//netportparam.SerialCameraPowerCtrl[srdt.ms_dev[i].CameraChannel-1] = 0;
@ -1797,7 +1824,7 @@ void CameraPhotoPortDataProcess( int port)
if(0 == srdt.historyimagenum[devparam[port].CameraChannel-1])
{
//netportparam.SerialCameraPowerCtrl[devparam[port].CameraChannel-1] = 0;
srdt.sampling &= 0xFB;
//srdt.sampling &= 0xFB;
}
else
@ -1805,7 +1832,7 @@ void CameraPhotoPortDataProcess( int port)
}
else
{
srdt.sampling &= 0xFB;
//srdt.sampling &= 0xFB;
//netportparam.SerialCameraPowerCtrl[pPortParam->CameraChannel-1] = 0;
}
pPortParam->SerialCmdidx = -1;
@ -2172,7 +2199,7 @@ int Gm_CtrlPtzCmd(u_char channel, DWORD ptzcmd)
// 2.打开串口通讯
Gm_OpenSerialPort(i);
//}
srdt.sampling |= 2;
//srdt.sampling |= 2;
srdt.SendStopPtzCmdTimeCnt = -1;
//return 1;
return Gm_Camera_Timer();
@ -2241,7 +2268,7 @@ int Gm_Camera_Timer(void)
if((SET_PRESETNO == (srdt.PtzCmdType & 0xFFFF0000))
|| (MOVE_TO_PRESETNO == (srdt.PtzCmdType & 0xFFFF0000)))
{
srdt.sampling &= 0xFD;
//srdt.sampling &= 0xFD;
return 1;
}
srdt.PtzCmdType = Cmd_Cancel;
@ -2257,7 +2284,7 @@ int Gm_Camera_Timer(void)
else
Gm_SendPelco_pCommand(srdt.PtzCmdType);
srdt.SendStopPtzCmdTimeCnt = -1;
srdt.sampling &= 0xFD;
//srdt.sampling &= 0xFD;
return 1;
}
else

2
TestComm/app/src/main/cpp/SensorsProtocol.h
Unescape Escape View File

@ -234,7 +234,7 @@ typedef struct
u_char IsHexToAt; /* 串口1是否使用At指令(0:使用At指令;1:使用16进制数据传输)*/
u_char sampling; /* 正在进行采样(0:没有进行采样;1:正在进行采样;)*/
u_char sampling[5]; /* 正在进行采样(0:没有进行采样;1:正在进行采样;)*/
u_char clcyesampling; /* 正在进行采样(0:没有进行采样;1:正在进行采样;)*/
u_char camerauseserial; /* 云台指令正在使用那个串口*/
DWORD PtzCmdType; /* 云台指令类型*/

3
TestComm/app/src/main/cpp/native-lib.cpp
Unescape Escape View File

@ -48,6 +48,7 @@ extern SIO_PARAM_SERIAL_DEF serialport;
extern float weatherpntmsg[10];
#endif
int istop=1;
//set_port_attr (int fd, int baudrate, int databit, const char *stopbit, char parity, int vtime, int vmin )
class NrsecSpiPort : public SpiPort {
public:
@ -655,7 +656,7 @@ Java_com_xinyingpower_testcomm_MainActivity_testSpi(
//a.sm3hash_tosm2(newkey,16,outpub,newkey,pucid,16);
//a.SM2Sign(0x00,outpub,outsign);
//a.SM2VerifySign(0x00,outpub,outsign);
//if(i < wen, i++)
//lxy modify modify
//LOGE("_test_ setRS485Enable true");
//setRS485Enable(true);

6
TestComm/app/src/main/java/com/xinyingpower/testcomm/MainActivity.java
Unescape Escape View File

@ -34,9 +34,9 @@ public class MainActivity extends AppCompatActivity {
binding.btnSpi.setOnClickListener(new View.OnClickListener() {
@Override
public void onClick(View v) {
String s = binding.edtTEXT.getText().toString();
Integer integer = Integer.valueOf(s);
String str = testSpi(integer,"ghghghh");
String s = binding.edtPort.getText().toString();
// Integer integer = Integer.valueOf(s);
String str = testSpi(0,"ghghghh");
binding.sampleText.setText(s);
}
});

Write Preview
Loading…
Cancel
Save